Cables and connectors??? Sent from my iPhone ...nr4c. bill
> On Nov 13, 2019, at 8:41 PM, Jim Danehy <jsdan...@gmail.com> wrote: > > My K3, upon moving it to a new operating spot now has a tracking issue. I > took off the cabling to ease moving to another room. I reinstalled the > cabling. However several bands do not switch ON THE KPA 500 when I change > bands on the K3. If I hit the key the KPA 500 immediately changed to the band > the K3 is on. So RF switching works. > > In the CONFIG Menu I went through the BAND MAP and made sure each BAND was > “IN”. But a couple although IN do not follow the K3. > > Any suggestions ? I will update the Firmware since what I have is a few > behind. That may cure the problem. In the interim please share your > suggestions. > > Thanks > W9VNE/VA3VNE > Sent from my iPhone > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com