Yes I got caught with using reference to an older manual on this topic. my oops
Bob, K4TAX Sent from my iPhone > On Dec 11, 2019, at 11:50 AM, char...@k5ua.com wrote: > > I should have checked for a new manual since the manual that came with my > KPA-1500 has 20 Kc bins which I see are now 10 Kc bins. In addition, the > tuning frequencies have been changed to 10 Kc increments. I think that is > why I was getting unexplained results from the tuner as I tuned across the > band. I will "re-teach" the KPA-1500 using these new parameters. > > Just to make sure, however, does everyone agree the current concept is the > first bin on 80m would be 10 Kc wide (3.500 to 3.510) and the correct tune-up > frequency to "teach" the KPA-1500 for that bin would be 3.505 Kc ? > > Secondly, the KPA-1500 would proceed to the next "taught" tuning parameters > (at 3.515) when the xcvr frequency would cross into the next bin slightly > higher than 3.510 ? > > Would appreciate all interest parties to agree or disagree with this scenario. > > Thanks for all the comments, I'm glad Electraft made the bin size smaller > because feedpoint impedances can change rapidly on 80M. > > Thanks, K5UA > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rmcg...@blomand.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com