Hi Both, This is my issue too — the switching of cables and volume levels when going from mic to digital and back. It’s a pain and I’ve been considering the almost unheard of move of swapping the KX3 for another make which has a separate digital input.
HOWEVER, I have also been experimenting with feeding my audio into the computer rather than the rig and letting it “forward” the sound via the soundcards into the KX3. It’s not completely there yet, but it does stop all that swapping of cables and the computer can handle the levels. You might be able to get it to work. I hope this helps, Regards Andy, G8TQH > On 14 Dec 2019, at 05:14, Don Wilhelm <donw...@embarqmail.com> wrote: > > Jim, > > Yes, switching between digital and SSB modes on the KX3 is troublesome from > the requirements imposed by the single Mic input jack and the single > headphone (SPKR) jack. > > For convience in switching between Data modes and speech modes, you will have > to go with the K3 which has independent per mode selections. The KX3 was not > designed to have that same capability. > With the KX3, some form of external switching would be required to switch > from microphone input to your digital inputs. Attenuators in the PC > soundcard to KX3 audio input might be requited so you do not have to contend > with the differences in audio levels. > > Such switching was not a part of the KX3 design, and you may wnat to upgrade > to a K3 for your station instead of the KX3. > > 73, > Don W3FPR > > On 12/12/2019 8:02 PM, Jim Jones wrote: >> Okay, I'm a 2nd owner of a KX3 and I'm still reading and trying >> To figure out all the commands and menu options. Yikes. Anyway, >> I run a lot of digital, mainly on Mars circuits. What I'm finding >> Is that I have to swap plugs for the mic and speaker each time I >> Have to go to voice and then back again for digital. What would >> Be nice to add to a wish list is to put a 6-pin mini-din connector >> On the KX3. This would have a pin for Mic input, Ground, Key line, >> And a line out audio level fixed level. >> This would allow the end user to take his computer/KX3/Signalink >> Out into the field and run digital fairly easy. This is just a >> Wish for something in the future. By the way, great rig. >> 73 >> Jim >> Jim Jones - N9DIX >> Waverly, TN >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to donw...@embarqmail.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to a...@rickham.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
