Thanks. After I set mine up the same, when I press Tune or transmit in
WSJT-X I can see audio going out to the USB Codec output in the Windows
audio system. However, no sign of any action on the K3S. Besides
toggling VOX on with the button at the upper left of the K3(s)'s front
panel, is there anything else you need to set on the rig to make this work?
On 1/28/20 6:57 PM, Barry wrote:
Frank,
Do use the K3 description on the radio page. This will allow the
software to change the radio frequency as you change bands and modes.
Once, you are on the band, frequency is a matter of the tone that is
generated. And, VOX does the rest. Pretty straight forward. It all
becomes really clear after your 3rd or so contact. :-) Have fun.
73,
Barry
K3NDM
------ Original Message ------
From: "Frank O'Donnell" <vf...@inkbox.net>
To: "Barry" <k3...@comcast.net>; "elecraft@mailman.qth.net"
<elecraft@mailman.qth.net>
Sent: 1/28/2020 3:00:01 PM
Subject: Re: [Elecraft] K3S, VOX and WSJT-X?
Barry,
Thanks. I was specifically wondering about entries on WSJT-X's
Settings > Radio page:
-- At the top of the page, is anything filled in for "Rig"?
-- The lefthand side of the page has the heading "CAT Control," so is
anything entered here (serial port, baud rate, data/stop bits,
DTR/RTS, etc)?
-- On the righthand side of the page, I assume "VOX" is selected as
PTT method. What choices are selected for Mode and for Split Operation?
Thanks again,
Frank
On 1/28/20 11:20 AM, Barry wrote:
Frank,
I use VOX for all of my digital operation to include AFSK, FT8,
and FT4. I really haven't done anything to the default setting that
came with the radio. I just set the line in to 20 and adjust the
power slider in WSJT-X to get the 4 bars with 5th flickering on the
K3s's ALC readout. Nothing fancy! One caution: watch your PA
temperature. It will definitely rise.
73,
Barry
K3NDM
------ Original Message ------
From: "Frank O'Donnell" <vf...@inkbox.net>
To: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net>
Sent: 1/28/2020 1:22:43 AM
Subject: [Elecraft] K3S, VOX and WSJT-X?
I've successfully used WSJT-X with my K3S for a fairly long time,
using a single USB cable for both audio transfer and CAT control.
Currently I'm interested in trying VOX in order to enable running
multiple instances of WSJT-X simultaneously on the same band (JT9
and WSPR on 474.2 kHz, if it's of any interest). Could anyone who
is using VOX for WSJT-X with a K3/K3S tell me how they have the
Settings > Radio pane in WSJT-X configured? I can probably stumble
my way through, but some pointers would undoubtedly make faster
progress.
Thanks and 73,
Frank K6FOD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
