YES,
I am using a KX3. I use the "bar" on the right and set 20db of
attenuation in the audio drive "chain".
Mike gain is now set at aprox 40, rather than 3-4 (one step makes a BIG
step)...
I can set "ALC" correctly.
73, steve WB3LGC
On 2/2/20 7:20 PM, AL7CR wrote:
An absolutely classic problem, I am the first to respond I am assuming only
because the Super Bowl is on!
I call this the "gain chain" problem. It depends a bit on how you are set up
but try the following. Go into the menu on the K3S and turn down the LIN OUT value. I
have mine set at 2 I believe. Once you do this you should be able to more finely control
the drive level.
This is likely to fix your problem at once.
AL7CR
On Sun, Feb 2, 2020, at 3:59 PM, Lee Murrah via Elecraft wrote:
I am running WSJT-X in FT8 mode on my K3S using the onboard sound card
and USB cable and VOX for keying. My computer is a Mac running
Catalina. The K3S manual recommends setting the drive at 4 or 5 bars to
avoid distortion by the ALC.. When I use the audio output slider set
the drive level, the display jumps from no bars to 6 bars, and vice
versa, and nothing on between. I have also tried using the MIC level
and the POWER slider in FT8 with the same results. The software id
decoding fine. Can anyon suggest what the problem might be?
KV5M
Lee
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to al...@mooseaviation.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sm.shearer...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
