You will need to correct the frequency errors using HDSDR calibration mode. There is a setting for each mode. It is in the Setup menu under input calibration.
Bob, K4TAX Sent from my iPhone > On Feb 20, 2020, at 3:26 PM, bw...@fastmail.fm wrote: > > So last week with your help I got HDSDR setup to control both a RFSPACE-IQ > (for panadapter) and the K3 at the same time. > > There is one behavior I haven't been able to figure out. > > I have HDSDR and the K3 both setup to output a CW sidetone at 600hz. > > In CW mode - HDSDR displays a close-up of a given signal on the lower-right. > And at dead-center its spot on - and producing the 600z tone. > But its then not quite spot on - on the K3 > > I've tried offsetting the side-tone frequency on HDSDR - thinking I just > needed to shift it so that when the K3 is spot on - the signal will show up > in dead center on the HDSDR signal window. > > But that doesn't seem to work. It still retains the exact same frequency > offset between HDSDR and the K3 > > Has anyone seen this? > And can suggest a fix? > > Thanks > Duane > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rmcg...@blomand.net > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com