Depending on the stability of the oscillator in the SDR, the numbers you
have now may be good, or may change. I have an early RSP1a and it
moves around a good bit. I don't rely on it for any degree of
accuracy. I think it is more temperature related than anything.
73
Bob, K4TAX
On 2/20/2020 3:59 PM, bw...@fastmail.fm wrote:
Thank you Bob!
Yes I see it - its the "RF Front End + Calibration dialog box".
And the "LO Freq Cal"
I've got it setup correctly now
Thanks!
Duane
On Thu, Feb 20, 2020, at 4:26 PM, Bob McGraw K4TAX wrote:
You will need to correct the frequency errors using HDSDR calibration
mode. There is a setting for each mode. It is in the Setup menu under
input calibration.
Bob, K4TAX
Sent from my iPhone
On Feb 20, 2020, at 3:26 PM, bw...@fastmail.fm wrote:
So last week with your help I got HDSDR setup to control both a RFSPACE-IQ
(for panadapter) and the K3 at the same time.
There is one behavior I haven't been able to figure out.
I have HDSDR and the K3 both setup to output a CW sidetone at 600hz.
In CW mode - HDSDR displays a close-up of a given signal on the lower-right.
And at dead-center its spot on - and producing the 600z tone.
But its then not quite spot on - on the K3
I've tried offsetting the side-tone frequency on HDSDR - thinking I just needed
to shift it so that when the K3 is spot on - the signal will show up in dead
center on the HDSDR signal window.
But that doesn't seem to work. It still retains the exact same frequency
offset between HDSDR and the K3
Has anyone seen this?
And can suggest a fix?
Thanks
Duane
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rmcg...@blomand.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
