You can optionally LOCK the MIC, CMP, and PWR control settings. See
CONFIG: PWR SET
See PWR SET on page 63 of the manual for further details. There is a
special function for the KPA500 where 2 sets of power per band are
saved. One value is for the AMP and one for Barefoot operation.
73
Bob, K4TAX
On 3/6/2020 12:27 PM, Tony wrote:
On 3/6/2020 12:13 PM, Mark Musick wrote:
I have no idea what you are talking about with the LOCK function. The
lock function I'm familiar with just locks the VFO A frequency.
Mark:
There's a separate lock function that locks the power setting so you
can't change it without unlocking it.
Tony
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rmcg...@blomand.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
