Don't forget to do the TX gain cal, that gets wiped during EE INIT.
Then save the config.
**BUT; You might try loading your saved config, then read my notes;
From my notes;
*_Cannot toggle LEDs SHIFT LO CUT HI WIDTH TAPPING LOCKED in CW or DATA
mode(s) + N/A_*
_Fix;_Turn off “CW QRQ” in config menu, or set “PB CTRL” to .05 instead
of .01
Notes; Any of the following, in any combination, will lock out the
toggle to HI CUT / LO CUT:
CW mode and CW QRQ ON ("+" sign visible on LCD display, not flashing)
CW mode and CONFIG:PB CTRL Shift=.01
DATA mode (FSK/AFSK)
Keith WE6R
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
