The K3 Utility help explains what gets EE INIT-ed.
Glad it is working.
Keith WE6R, Elecraft K3 Tech
On Mon, Mar 30, 2020 at 8:47 PM Martin Sole <hs0...@gmail.com> wrote:
> Keith,
>
> Many thanks for the heads up. I did the gain calibration instinctively as
> I did not know if it would be modified by the EE-Init or not, the D10
> manual page 66 on parameter initialization does not state.
>
> All working well now and the radio is back to proper operation.
>
> Martin, HS0ZED
>
>
> On 31/03/2020 04:50, Keith Trinity WE6R wrote:
>
> Don't forget to do the TX gain cal, that gets wiped during EE INIT.
> Then save the config.
> **BUT; You might try loading your saved config, then read my notes;
> From my notes;
>
> *Cannot toggle LEDs SHIFT LO CUT HI WIDTH TAPPING LOCKED in CW or DATA
> mode(s) + N/A*
>
> *Fix;* Turn off “CW QRQ” in config menu, or set “PB CTRL” to .05 instead
> of .01
>
> Notes; Any of the following, in any combination, will lock out the toggle
> to HI CUT / LO CUT:
>
> CW mode and CW QRQ ON ("+" sign visible on LCD display, not flashing)
>
> CW mode and CONFIG:PB CTRL Shift=.01
>
> DATA mode (FSK/AFSK)
> Keith WE6R
>
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
