I ask “why use a SignaLink with the K3?” The K3 already has buffered Lin In and Line Out. Separate settings for in/out for each mode.
The one item to pay attention to is transmit audio level. You should set the power out by using the Per knob on the K3 front panel. Then adjust the audio to show 4 solid bars and flashingbfifth bar on the ALC meter. Sent from my iPhone ...nr4c. bill > On Apr 4, 2020, at 4:22 AM, David Bondy <da...@g4nrt.com> wrote: > > I have been using digital modes for years and have a number of SignaLink USB > devices which have all worked very well with a variety of rigs. > > I am new to the K3 and have bought the Tigertronics cable and module set to > allow me to connect a SignaLink USB to the rear Line In/Out and PTT > connections on my K3. > > I am able to operate the rig (via a USB to RS232 cable for CAT) and transmit > JT8 signals (via the SignaLink) - I can see that I am getting out by > monitoring Hamspots! HOWEVER I am not able to get enough drive from the K3 > via the Signalink USB to decode incoming signals. > > Can someone who has this working please tell me what settings they have made > to the K3 in order to drive the SignaLink? I have set CONFIG > LIN OUT to > 100 and I have rotated the Rx knob to full clockwise on the SignaLink but I > am still not getting enough output to drive WSJT-X. I am sure that I am > missing something but I don’t know what because I would expect the LIN OUT > setting to be more like 10! > > Thanks in advance and 73, > > David G4NRT > > P.S. Please don’t bother to reply telling me to connect the rig to my PC > sound card … it doesn’t have one! > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
