Christophe,
You have not yet answered 2 important questions which relate to your 40
meter operation.
1) Do you have the K60XV option installed (or do you have the Rework
Eliminators installed)?
2) What is your setting of the secondary menu D19 parameter?
The answers to those 2 questions is critical to what to do next in
troubleshooting your problem.
73,
Don W3FPR
On 4/11/2020 5:24 AM, Christophe aufacf wrote:
hello don
the frequency to find with CAL FACT 18.159 kHz
thank you in advance for your good advice
73 , Cris F8ACF
Le ven. 10 avr. 2020 à 21:21, Don Wilhelm <donw...@embarqmail.com> a écrit :
Christophe,
Tune the K2 to 7100kHz
Then plug the internal counter probe into TP1 and the P6 header on the
Control Board.
Enter the menu to CAL FCTR and hold EDIT
The frequency will be seen in the K2 display.
You could alternately use an external frequency counter to read the
frequency at TP1.
73,
Don W3FPR
On 4/10/2020 2:48 PM, Christophe aufacf wrote:
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
