hello don I forgot to answer you no K60XV, no rework that I do not know this option, I have the NB option provided for purchase
for the parameter D19 = N thank you in advance 73 , Cris F8ACF Le sam. 11 avr. 2020 à 16:52, Don Wilhelm <donw...@embarqmail.com> a écrit : > > Christophe, > > You have not yet answered 2 important questions which relate to your 40 > meter operation. > > 1) Do you have the K60XV option installed (or do you have the Rework > Eliminators installed)? > > 2) What is your setting of the secondary menu D19 parameter? > > The answers to those 2 questions is critical to what to do next in > troubleshooting your problem. > > 73, > Don W3FPR > > On 4/11/2020 5:24 AM, Christophe aufacf wrote: > > hello don > > > > the frequency to find with CAL FACT 18.159 kHz > > > > thank you in advance for your good advice > > > > 73 , Cris F8ACF > > > > Le ven. 10 avr. 2020 à 21:21, Don Wilhelm <donw...@embarqmail.com> a écrit : > >> Christophe, > >> > >> Tune the K2 to 7100kHz > >> Then plug the internal counter probe into TP1 and the P6 header on the > >> Control Board. > >> Enter the menu to CAL FCTR and hold EDIT > >> The frequency will be seen in the K2 display. > >> > >> You could alternately use an external frequency counter to read the > >> frequency at TP1. > >> > >> 73, > >> Don W3FPR > >> > >> On 4/10/2020 2:48 PM, Christophe aufacf wrote: > >> > -- 73 , F8ACF56 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com