Just an observation regarding Don's comment:
Last week I decided to do my radio shack reorganization (complete
relocation of things) and one result is the main 12v line from my
station Astron 50M PS, which is welding wire (no.6 awg?), to my main
distribution strip was shortened from about 16 to 6-feet. Resulting
with 110w output on 2m FM vs 90w previous (guessing due to better
voltage and/or lower coax loss).
One of the reasons for rearranging the station was to shorten
cabling. E.g. I eliminated a 20-foot runs of LMR-600 from both my 6m
1000w PA & 2m 1500w PA. 240vac line is about 12-foot longer to my
50v PS for the amps. I don't expect to see much voltage sag with a
load of 12A. I only saw 1-volt sag in the original location.
Many of my 12v equipment power lines will also be shortened. win-win!
73, Ed - KL7UW
630m to 3cm
Date: Sat, 25 Apr 2020 11:42:35 -0400
From: Don Wilhelm <donw...@embarqmail.com>
To: Ron Manfredi <wa2...@optonline.net>, elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S poor CW keying further investigation
Message-ID: <a435f58e-0f61-c541-3f1f-37da898b0...@embarqmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Solder each power supply lead to a short length of #10 wire. Insulate
the connection well.
73,
Don W3FPR
73, Ed - KL7UW
http://www.kl7uw.com
Dubus-NA Business mail:
dubus...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com