Walter, 50 MHz TX constant 4 W carrier measures 13.53 V on DMM (outside the DC power plug), 13.3 V on KX3 meter, 2.9 A on KX3 meter and 1.6 to 1 VSWR on KX3 meter. Microwave dummy load with BNC to N adapter.
I didn't measure all of this when the rig was new, so have no baseline to know what is normal. :-( Thanks, Drew n7da On Fri, May 8, 2020 at 11:19 PM Drew Arnett <arnett.d...@gmail.com> wrote: > > What do you see for current draw on the KX-3? Manual says 1 to 2 A typical. > > I'm seeing 3 A at less than full power on one band. Yikes! Makes me > wonder if the repair shop is open? Elecraft website says hunkered > down and mostly work from home. > > Thanks and best regards, > > Drew > n7da ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com