Thanks all for the feedback. T1 correction is now made and now off to make a cup of tea (there’s a Brit in me somewhere....).
Paul Gacek W6PNG/M0SNA Www.nomadic.blog > On May 29, 2020, at 1:51 PM, Fred Jensen <k6...@foothill.net> wrote: > > You count "passages through the hole" as turns in all cases with toroid > cores. A straight wire thru the donut is one turn. I can't answer your > question ["does it make a difference?"] because I don't have a K1, but I did > build a K2, and based on that, I think the answer is "Yes, it will make a > difference." > > 73, > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > >> On 5/29/2020 12:49 PM, Paul Gacek via Elecraft wrote: >> I have completed the RF board RX build portion and about to test it with the >> filter board and front panel. >> >> I realize I may have a discrepancy on turns for T1. I count a turn by >> tracing the wire around the toroid and get 4 turns of green but the manual >> page 14 states I should count a turn each time the wire passes through the >> center of the toroid which is 5. >> >> As T1 is an impedance match (1:5?) will the “extra” turn make a huge >> difference? >> >> Intuitively I would say yes as it’s 20% more turns by the page 14 method. >> >> Any guidance on whether I should correct this is welcome. >> >> Paul >> W6PNG/M0SNA >> www.nomadic.blog >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w6...@yahoo.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com