I should have mentioned that. I strip 5 or 6 inches of insulation. That was
why I cleaned the top of the ground rod and sprayed it with electrical
lubricant. I used a stainless steel hose clamp to hold the stripped wires
against the ground rod at each end of the stripped wire portions. The next
part is what I wrote about to start with.
Ed Tanton
Marietta, GA
On 6/3/2020 10:31 PM, Ed Tanton wrote:
I mention all this as a response to the question about the use of liquid
tape.
I did all this working on the ground rods and radials connected under my
HyGain HyTower.
What do you use to attach the ground wire(s) to the ground rod? Buckeyes?
73 de K2ASP - Phil Kane
Elecraft K2/100 s/n 5402
From a Clearing in the Silicon Forest
Beaverton (Washington County) Oregon
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
