And if you DO own a Hakko 808, remember it is not a soldering gun with
an on/off trigger. It is ALWAYS HOT while plugged in. The trigger
simply activates the suction mechanism.
When you lay it down, lay it on something non-combustable and non-painful.
73,
Kent K9ZTV
On 6/12/2020 2:31 PM, Don Wilhelm wrote:
For those who own a desoldering iron like the Hakko 808, stripping the
enamel from heat strippable wire is quick and easy - just like a
solder pot. Melt a bit of solder on the tip and push the wire into
the tip center. Wait a bit for 'smoke' to appear and then pull the
trigger. Presto, stripped lead.
Just clean the inside of the tip with the tip cleaning rod after a few
leads have been stripped. If you don't do that, the tip will clog.
73,
Don W3FPR
--
This email has been checked for viruses by AVG.
https://www.avg.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com