I want to realign the output of my K1, the radio has an internal antenna tuner. The reason is because I check the radio is not coming out with the proper power (test performed with dummy load and PWR-SWR meter Daiwa). "OUT" is at 2.0W, and I can see, on the power meter, 1W. I proceeded by removing the antenna tunner module, to be able to access L1, ... L6 (filter board for 40/20 mts band). However after this, when I try to calibrate the RF filters, I can only get 0.1 W when I put the K1 in tune mode. I check again the "OUT", and I stay 2W. If I reinstall the internal antenna tuner, the radio returns to the initial behavior (only 1W when "OUT" has been set to 2.0W). Can someone guide me on how I should perform the power realignment process?.
Thank you Al W4RAM -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com