Before doing that be sure your connections are secured to antenna and it is working.
Have a great day! Bill ________________________________ From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on behalf of Victor Rosenthal 4X6GP <k2vco....@gmail.com> Sent: Sunday, July 19, 2020 12:00:19 PM To: elecraft@mailman.qth.net <elecraft@mailman.qth.net> Subject: Re: [Elecraft] K3 Issue I suggest that you call Elecraft Support on Monday. I'm sure they have a diagnostic procedure that they can take you through on the phone. Even if there IS a failure somewhere, chances are that you can fix it yourself with their help. Just guessing, but I suggest you open it and make sure all the small coax cables to the synthesizers are well seated. Since it was recently shipped, something could have worked loose. 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5 http://www.qsl.net/k2vco/ On 19/07/2020 19:53, w5...@comcast.net wrote: > ok I'm going to be answering several of your suggestions at once > here. > > First, when I powered off last night, I used the power button on the > K3 itself, I did not kill the power supply first > > The sub RX has been turned off and the RX Ant is NOT selected. Ant 1 > is selected and the Antenna IS plugged into the port > > The is NO noise shown on the S meter and I have a pretty constant S3 > to S5 noise here at my qth. > > Regardless of mode selected there is no power output, the display > says 0 > > When I activate the tuner, regardless of band, it shows no SWR, says > 5 watts out, but there is NO POWER OUT of it. It always acts like it > is matching, or sounds like it is. > > Ronnie > > -----Original Message----- From: Bill Frantz Sent: Sunday, July 19, > 2020 11:40 AM To: w5...@comcast.net Cc: Ian Kahn ; Elecraft > Reflector Subject: Re: [Elecraft] K3 Issue > > The K3 can get antennas in a bewildering collection of ways. If the > RX antenna switch is on -- and this was my way of getting on > reception -- it might be your problem. The K3 can also send received > signals out on one of the BNC connectors and expect to get them back > on another. > > I recommend a careful reading of the manual, perhaps in PDF form with > a search for "antenna". The manual is downloadable from the Elecraft > web site. > > 73 Bill AE6JV > > On 7/19/20 at 12:10 PM, w5...@comcast.net wrote: > >> yes sir.. using antenna port 1 and have it selected. HOWEVER.. I >> did move the antenna to port 2 and selected that port to no >> improvement. Same issue > > ----------------------------------------------------------------------- > > Bill Frantz | Privacy is dead, get over | Periwinkle > (408)348-7900 | it. | 150 Rivermead Rd > #235 www.pwpconsult.com<http://www.pwpconsult.com> | - Scott McNealy > (1999) | Peterborough, > NH 03458 > ______________________________________________________________ > Elecraft mailing list Home: > http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailman.qth.net/mmfaq.htm Post: > mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this > email list: http://www.qsl.net/donate.html Message delivered to > k2vco....@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9...@live.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com