Thanks Lyn - just joined up on Slack and will check in soon. Day job getting in the way of my hobbies again!
Best regards, Bret aka Charles Jessee N4SRN ------ Original Message ------ Brett - I'm not Bob ... but I might be able to help with your Winlink issues. I am quite active on the various P2P modes in Winlink express and have formed a nationwide group to become proficient in handling P2P message traffic in the case of a "grid down" emergency (no internet, no cells, no repeaters, no power). You may be too close to the gateway station, especially with a vertical antenna (NVIS might even be marginal at 5 miles). If you'd like some other stations to try, at a greater distant and in P2P mode, let me know. 73 Lyn, W0LEN -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of MaverickNH Sent: Sunday, August 02, 2020 8:59 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Question on K3S and Winlink Express Any luck with that Bob? I've been using Winlink on Packet VHF from a Kenwood TM-D710G but wanted to try 80m with my K3S. I'm to the point where Ardop is trying to connect to a local gateway about 5mi away from a 43ft vertical with remote ATU at base at 50W. No connection yet... I'm able to RX/TX on WSJT-X so figure my configuration should work, but perhaps I need to tweak it for Ardop? BRET/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
