A CM-500 does not need RPH bias mic settings it is a high output element and 
RPL bias will do fine with mic gain beteeen 10-20 (I use 17). 

Sent from my iPhone
...nr4c. bill


> On Aug 23, 2020, at 1:19 PM, Dave Erickson <ra...@disseminator.net> wrote:
> 
> This just happened to me. I heard a screeching whine when hitting transmit 
> in ft8, turns out the recent update reset all my sound assignments.
> 
> 73
> 
>> On 8/23/2020 11:01 AM, Buck wrote:
>> I would suspect a Windoze update scrambled your sound assignments.  Go back 
>> and check all your settings.
>> 
>> k4ia, Buck
>> K3s# 11497
>> Honor Roll  8B DXCC
>> EasyWayHamBooks.com
>> 
>>> On 8/23/2020 11:56 AM, N4ZR wrote:
>>> Recently, I began trying to use the rear microphone jack on my K3 with my 
>>> Yamaha boom mike, instead of using a stand-alone USB sound card and feeding 
>>> the signal to the LIN IN jack.  This worked fine for a couple of weeks, but 
>>> today when I tried it, I got very loud white noise driving my radio and amp 
>>> essentially to full scale. I have MIC SEL set to RPH BIAS, which has worked 
>>> in the past. Any MIC gain setting over 7 drives the amp to full output.  
>>> When I pull the mike plug out of the jack, the problem goes away.
>>> 
>>> Have I inadvertently messed up another setting, or perhaps a failure in the 
>>> mike?
>>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ra...@disseminator.net 
> 
> -- 
> Dave Erickson
> k0dom
> 73
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to