I've had good luck setting up my KX3 for FT-8., but it took awhile. I
used several good sources which I'm sure other will point you to. But
here's my current issue:
I'm regularly getting FT-8 QSOs on 40m, 20m, and 10 m with no problems.
The other night I decided to try 17m. My Windoze computer replied "USB
device not recognized." HUH?
I been using the KX3USB and a cheap sound card in a very simple set up.
Any ideas why the PC reacts this way to 17m? I seem to be transmitting
and receiving fine on 17m. Does it matter?
david
KC1DNY
KX3 #08651
On 8/26/2020 3:49 PM, Hunsdon Cary III wrote:
I am finally getting around to setting my KX3 Up for FT-8 and have watched
several YouTube videos on setting up the KX3 and read Don Wilhelm’s excellent
paper on setting up Elecraft radios for digital modes (Tnx, Don).
My hang up is the radio settings tab in WSJT-X: baud rate, data bits, stop
bits, PTT, etc. Any help would be appreciated!
Tnx & 73,
Cary, K4TM
H3cary at GMail dot Com
Sent from Clovelly Cottage II, home of amateur radio station K4TM and the most
creative Sue Cary, in the foothills of the beautiful Blue Ridge mountains of
Virginia.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to dhai...@bates.edu
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
