You can use the line in/out connectors in the back of the radio
and a "sound card" for your computer. USB sound cards are
available inexpensively from Amazon. I have one for my KX3 which
I think cost about $5.00. You may need to install a pad to lower
the signal level between the line out on the radio and the Mic
in on the sound card.
In an ideal world, you will get the the RJ-45 connector
repaired, either locally with someone who can re-solder the
surface mount connector or by getting it repaired by Elecraft.
73 Bill AE6JV
On 9/17/20 at 1:29 PM, kd...@denstarfarm.us (Bob KD7YZ) wrote:
So today I was reaching behind the K3. The board connector that Is/Was
the USB input, came out in my hand.
It came off the KiO3b board.
I was reading the paper that came with the KIO3b install and discovered
I can use the RJ-45. Which I did.
I currently am controlling the K3 with DxLab's 'Commander'. So the RS232
connection is fine.
When I ran up WSJT-X and was attempting to connect, I noticed No Audio.
The 'Commander' IS controlling the K3 and quite well. Just can't do FT8
or MSK144 Meteor-Scatter anymore.
How do I get digital audio? I gather it's NOT thru the KIO3b RJ-45 .
That flimsy connector was SMA soldered and that level I can't do .. or
wouldn't try anyway. Skill level deteriorated for that small stuff.
Any help on the audio?
----------------------------------------------------
Bill Frantz | Art is how we decorate space,
408-348-7900 | music is how we decorate time.
www.pwpconsult.com | -Jean-Michel Basquiat
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
