Just to clarify: When it says select 10.0 or 10.1 it makes it sound like you'll see both and you pick the one you want. The reality is you'll see EITHER 10.0 or 10.1, depending on how you built the filter board.
The previous post was correct that you'll need to swap in the other crystal to get 10.000-10.080. Craig NZ0R K1 #1966 K2/100 #4941 KX1 #1499 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Gates, KD3JF Sent: Tuesday, July 11, 2006 9:05 AM To: elecraft@mailman.qth.net Subject: [Elecraft] Help with K1 I need help with my K1. I did not realize that my 30 meter band was set up for 10.0 instead of 10.1. I checked the manual and it says: To select B1 or B2 and hold display button and select 10.0 or 10.1. That does not seemingly work for me. When I hold display button nothing happens so I do not see the option of selecting 10.1. Any help will be appreciated. I have been using the KX1 on 30 and did not realize I could not tune to 10.119 on the K1. Paul, KD3JF Glen Burnie, MD FM19qd (Map Grid Square) _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com