Eric,
The KPA100 RS-232 data appears on pins 2 and 3 of the AUX IO connector
with pin 5 being RS-232 Signal Ground. Chassis ground is on pin 1. See
the KPA100 manual.
DO NOT connect to any other pins of the AUX IO connector, those are
internal K2 signals to be used by external devices such as the KAT100 or
XV series transverters.
I can't help with the KPA1500 end.
73,
Don W3FPR
On 12/12/2020 8:05 AM, eric norris via Elecraft wrote:
The KPA1500 Manual mentions using a K2 with serial interface for band data, but
does not show how to wire it (that I can find). I can't find it in the nabble
archive either. Does anyone know how to do this?
Thanks and
73, Eric WD6DBM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com