Finding the correct illuminated (neon lighted) rocker switch used in the
Weller base units for their soldering stations, can be a daunting task.
For the Weller WTCPS, WTCPT, WLC100, WPC300, EC1001, EC3000, early EC1002
models -- Weller used 2 primary suppliers for the illuminated (neon) power
switch on these base units: C&K (ITT) and Carling (632 series)
The Carling 632 series, can be found here (updated Carling web site)
http://rocker-switches.carlingtech.com/illuminated-rocker-switch__37.asp
Specifically the replacement part number appears to be: 632152-2B-JN
http://www.carlingtech.com/pdf/CarlingSW_622_632.pdf
This Carling switch is now as a solid color rocker or as a translucent solid
rocker
available in Blue, Green, Amber as well as Red. It is available in a wide
range of lamp voltages from unballasted LED (3 VDC) to 250 V Neon
Finding these switches for component replacement can be difficult.
Some manufacturers only sell as an OEM component, will other suppliers
eliminated the specific model, or require a special order with a quantity of
100 to 1,000 units.
Specifications of the Weller illuminated (neon) rocker switch
120 VAC at 8 A
SPST (On-None-Off)
120 VAC neon illumination
.187" quick disconnects for ease of replacement with existing Weller wiring
The Carling Switch current used by Weller has a nice rounded edge to the
translucent rocker -- NKK and Cherry have a more rectangular, distinct edge.
GC / Waldom Electronics now carried the exact Carling switch being used in
current Weller production.
GC Switch number: 35-696 SPST ON / OFF- RED CLEAR ROCKER
As of July 16th, they reported 239 in stock !
Cost was about $ 2.50 (very reasonable for a blister pack part)
Available at any electronics distributor or parts store - that carry
CG/Waldom
http://www.gcwaldom.com/home.html
Two additional candidates for this illuminated rocker switch replacement are
available from NKK Switch and Cherry.
These suppliers have both 120 VAC (NA, Japan) and 240 VAC (EU, Asia) neon
versions in their catalogs for these line voltages.
The Cherry model comes in an Amber and Green color option.
NKK CWSB21CACF (this is DPST version) - works by NOT using the "2a" contact
(heat shrink insulation over QC plug).
Allied Electronics part number: 870-0119
Allied & NKK did not list the SPST version in the catalog.
I have personally used this part for replacing a defective switch in a PU120
based unit (WTCPS) - it works fine.
Cherry LR Series ... LRA22H2BBRLN --- SPST
Allied part number 908-0105
I have personally used this switch for replacing a defective switch.
At 97 cents - it is a GREAT inexpensive buy
http://www.cherrycorp.com/english/rockers/lr_rocker.htm
Greg
w9gb
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com