Yes, you have to lock the VFOs. That is a menu only (or macro). What I have done is to program a macro into PF1 that does A->B, lock VFO, Turn on Diversity. RIT works fine, both RX track.
On Thu, Feb 25, 2021, 20:16 Tom Doligalski via Elecraft < elecraft@mailman.qth.net> wrote: > I’ve rediscovered Diversity RX on my K3, and have a question. > > Scenario: I’m working folks on 40M CW with a bit of QSB. Diversity is on, > and things are working great. > > Suddenly I receive an off-frequency call, say up a couple hundred Hz. > Normally no trouble, as I just use my trusty RIT control to move up and > copy him, so I can keep my TX on the original frequency. But, in Diversity, > the second VFO remains on the original frequency rather than tracking with > the main RX. As a result, I get two signals until I clear the RIT. > > Am I missing something? I really would like BOTH receivers to track the > RIT in Diversity. > > 73, Tom W4KX > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k1ep.l...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com