Does it receive?

Wes  N7WS

On 3/24/2021 1:03 PM, Christian Janssen DL1MGB wrote:
Hello,

it happened during the Russian DX Contest last Saturday, from one second to 
another. No output. When I tune the display looks like this: 
http://dl1mgb.com/temp/k3_no_power.jpg

Following conditions:

- sending into a 50 ohm dummy load
- no matter how many watts are set with PWR knob
- Test mode off
- TX INH off
- all driver transistors working (three screw test)
- no output power also on external watt meter
- happens on all bands
- happens with KPA set to "not inst"
- knocking on housing doesn't change anything
- when starting the antenna tuner, it says 5.0 watts, but no output on the 
external watt meter

I am running out of ideas :-)

73s Chris DL1MGB

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to