Check to see that the AUX cable is properly seated at the amp and at the
the K3. If you have the KAT500, check the control cable is connected
as shown on page 5, Figure 1 in the KAT500 manual.
Always secure the plugs with the supplied connector screws. Just
plugging in the connector is and invitation for issues.
73
Bob, K4TAX
Message: 6
Date: Fri, 23 Apr 2021 21:17:02 -0400
From: "Joe K2UF"<j...@k2uf.com>
To:<elecraft@mailman.qth.net>
Subject: [Elecraft] K3/KPA500 question
Message-ID:<mailman.8391.1619267475.3572.elecr...@mailman.qth.net>
Content-Type: text/plain; charset="us-ascii"
I have my K3-KAT500-KPA500 working great. The amp is off to the left side
and I can't see the display easily. while working on building an auto
antenna switch I noticed that the band display on the amp does not synch
with the K3. It seems to be random. If I hit one dit on the key the amp
will synch the band with the K3. I am not sure if this has been working
like this right along and just did not notice.
Any ideas guys.
73 Joe K2UF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
