> On May 16, 2021, at 06:06, Louandzip via Elecraft <elecraft@mailman.qth.net> > wrote: > > If you can't find a kit: I modded my K1 to illuminate the LCD back in '03, > before the mod kit was available. It's pretty easy to do (a white sticker, > two leds, and a resistor) and works very well, but it does require a > transreflective LCD in place of the original reflective one supplied back > then.
Morning Lou, I looked on the Elecraft site and the part number for the transreflective LCD is E600015. A search for that part number on the site turned up nothing. So they don’t appear to be stocking that part anymore. If someone reading the reflector knows the source for that part, I will see if I can find one. If not, I found this approach — https://bit.ly/3fgvtL2 — to adding a backlight to a built K1. With a little tinkering, the latter should work as well. Thanks Lou! David Thompson, AG7TX Jack of All Trades Master of None CWOps #2861 dbthomp...@me.com ag...@arrl.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com