Unfortunately not that simple Andy. When switching to CW mode, I tune around to make sure that it’s not a shift causing this . But , no luck.
John WA1EAZ > On May 20, 2021, at 5:50 PM, Andy Durbin <a.dur...@msn.com> wrote: > > "I can hear a 6 meter beacon on Data mode, but when I switch to CW I get no > copy at all." > > Does the K3, like the TS-590, have a user option that defines how the change > to CW is handled? The options are typically to keep the dial frequency the > same and shift where the RX is listening, or to keep listening in the same > place and shift the dial frequency. In either case the shift is the chosen > CW pitch. > > 73, > Andy, k3wyc > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jstengrev...@comcast.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
