On 5/20/2021 2:50 PM, Andy Durbin wrote:
"I can hear a 6 meter beacon on Data mode, but when I switch to CW I get no copy at
all."
Does the K3, like the TS-590, have a user option that defines how the change to
CW is handled?
Not that I know of. In digital and SSB modes, the dial frequency is the
suppressed carrier. In CW mode, it's the actual signal frequency. The K3
takes the desired CW note frequency into account. In RTTY modes, it's
the Mark Frequency.
When you switch to CW to hear a CW signal that you heard in Digital
mode, you'll have to tune it in. The K3 has a front panel button that
allows the op to use plus or minus CW offset.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
