Paul, I believe you should hear a few relays click. If you are connected to a load that the T1 “knows” there may be no click. You can test that by using a different antenna or a dummy load.
Jim / K7TXA > On Aug 14, 2021, at 2:21 PM, Paul Ecker <ecke...@gmail.com> wrote: > > I just purchased a T1 Tuner from a fellow Ham. In reading the manual, it > says: > > *To start tuning, transmit while the green LED is flashing (about 3 > seconds). If you use SSB voice or a CW keyer, relay switching will start > and stop. Keep transmitting until all LEDs turn off.* > > I am not hearing or feeling any relays switching on and off. Is that > normal?? > Any other suggestions on testing the T! to ensure I have a working unit? > > 73 Paul w2eck > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w6...@me.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com