Make sure you haven't bypassed the tuner. I have this (excellent) tuner, but I have been caught out a couple of times when the tuner has been in bypass, and I have tried to tune. You will hear the relays when it is tuning.

Paul / MW7PAJ

On 15/08/2021 01:00, James Bennett via Elecraft wrote:
Paul,

I believe you should hear a few relays click. If you are connected to a load 
that the T1 “knows” there may be no click. You can test that by using a 
different antenna or a dummy load.

Jim / K7TXA

On Aug 14, 2021, at 2:21 PM, Paul Ecker <ecke...@gmail.com> wrote:

I just purchased a T1 Tuner from a fellow Ham. In reading the manual, it
says:

*To start tuning, transmit while the green LED is flashing (about 3
seconds). If you use SSB voice or a CW keyer, relay switching will start
and stop. Keep transmitting until all LEDs turn off.*

I am not hearing or feeling any relays switching on and off. Is that
normal??
Any other suggestions on testing the T! to ensure I have a working unit?

73 Paul w2eck
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w6...@me.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to p...@teulu.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to