The current version of hamlib is, 4.3
I had similar delay of TX issues with my FT-1000D and WSJT-X on Linux.
After I updated to hamlib 4.x from version 3.3, my issues went away.
Additionally, all the current rigs were updated in the library. Note,
they are all now four digit radio codes, whereas version 3.3 was mostly
three digit radio codes.
Bob, WG9L
On 10/11/2021 2:34 PM, Joe Subich, W4TV wrote:
Update to the latest WSJTX and hamlib. The problem is due to a timing
issue in the older versions of hamlib not allowing WSJTX to begin audio
until it receives certain CAT responses from the K3/K3s. Older
versions of hamlib were doing too many (unnecessary) CAT commands.
73,
... Joe, W4TV
On 2021-10-11 3:23 PM, James Bennett via Elecraft wrote:
David -
I’ve played with the VOX Gain to no avail - at zero the rig never
transmits, and at 100 (where it has been sitting) I get the delay.
Various settings in between have no effect. The Delay controls how
quickly the rig goes back into receive mode after speaking. But,
thanks for the hints!
Jim Bennett / K7TXA
Eagle, ID
On Oct 11, 2021, at 12:00 PM, D Remy <d...@dremy.com> wrote:
I know nothing about operating in the digital modes but wonder if
the delays might be changed with Vox Gain and Delay settings.
Good luck!
David, NS4V
David R. Hourdequin, PE
Specialty Heavy Timber Engineer
828-421-6216
On Oct 11, 2021, at 13:57, James Bennett via Elecraft
<elecraft@mailman.qth.net> wrote:
Hi Folks,
Wondering if someone on the list might be able to solve this one.
I’m using a K3 and while CW is my main passion, I do dabble in FT8
occasionally. I’ve noticed that the radio does not start
transmitting right at the start of the 15 second FT8 cycle. It will
start anywhere from 2 - 5 seconds into the cycle. I can’t help but
think that is not a good thing and could be the cause of an
occasional missed QSO. I DO make QSOs but this kinda bothers me.
The audio signals are delayed this amount of time, as is the red TX
light coming on - I am using VOX . Same thing happens when I press
the TUNE button - it takes anywhere from 2-5 seconds for the rig to
go into transmit mode.
I really doubt it is due to computer overload, as the only
applications running are WSJT-X, MacLoggerDX (my logging program),
and JT-Bridge - all other applications have been ended. Since this
happens when I press TUNE, that pretty much eliminates JT-Bridge
and MacLoggerDX as the cause. Some hardware and software specifics:
Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5.
Mac OS Big Sur 11.5
WSJT-X 2.4.0
Audio Interface: Tascam US-125M external USB device
Values in the DT column are consistently about 0.1 - 0.4
Wasn’t sure if I should post this here or on the WSJT-X list, but I
thought I’d start here. Any ideas?
Jim / K7TXA
Eagle, ID
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w...@comcast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
