I upgraded to 2.5.0 last night at Jim’s suggestion and it worked! No more delay! Ron W5SUM
Sent from my iPhone > On Oct 12, 2021, at 7:13 AM, Bob Schwerdlin <w...@comcast.net> wrote: > > The current version of hamlib is, 4.3 > > I had similar delay of TX issues with my FT-1000D and WSJT-X on Linux. After > I updated to hamlib 4.x from version 3.3, my issues went away. Additionally, > all the current rigs were updated in the library. Note, they are all now > four digit radio codes, whereas version 3.3 was mostly three digit radio > codes. > > Bob, WG9L > >> On 10/11/2021 2:34 PM, Joe Subich, W4TV wrote: >> >> Update to the latest WSJTX and hamlib. The problem is due to a timing issue >> in the older versions of hamlib not allowing WSJTX to begin audio >> until it receives certain CAT responses from the K3/K3s. Older >> versions of hamlib were doing too many (unnecessary) CAT commands. >> >> 73, >> >> ... Joe, W4TV >> >> >>> On 2021-10-11 3:23 PM, James Bennett via Elecraft wrote: >>> David - >>> >>> I’ve played with the VOX Gain to no avail - at zero the rig never >>> transmits, and at 100 (where it has been sitting) I get the delay. Various >>> settings in between have no effect. The Delay controls how quickly the rig >>> goes back into receive mode after speaking. But, thanks for the hints! >>> >>> Jim Bennett / K7TXA >>> Eagle, ID >>> >>> >>>> On Oct 11, 2021, at 12:00 PM, D Remy <d...@dremy.com> wrote: >>>> >>>> I know nothing about operating in the digital modes but wonder if the >>>> delays might be changed with Vox Gain and Delay settings. >>>> >>>> Good luck! >>>> David, NS4V >>>> >>>> >>>> David R. Hourdequin, PE >>>> Specialty Heavy Timber Engineer >>>> 828-421-6216 >>>> >>>>> On Oct 11, 2021, at 13:57, James Bennett via Elecraft >>>>> <elecraft@mailman.qth.net> wrote: >>>>> >>>>> Hi Folks, >>>>> >>>>> Wondering if someone on the list might be able to solve this one. I’m >>>>> using a K3 and while CW is my main passion, I do dabble in FT8 >>>>> occasionally. I’ve noticed that the radio does not start transmitting >>>>> right at the start of the 15 second FT8 cycle. It will start anywhere >>>>> from 2 - 5 seconds into the cycle. I can’t help but think that is not a >>>>> good thing and could be the cause of an occasional missed QSO. I DO make >>>>> QSOs but this kinda bothers me. The audio signals are delayed this amount >>>>> of time, as is the red TX light coming on - I am using VOX . Same thing >>>>> happens when I press the TUNE button - it takes anywhere from 2-5 seconds >>>>> for the rig to go into transmit mode. >>>>> >>>>> I really doubt it is due to computer overload, as the only applications >>>>> running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge - >>>>> all other applications have been ended. Since this happens when I press >>>>> TUNE, that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. >>>>> Some hardware and software specifics: >>>>> >>>>> Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5. >>>>> Mac OS Big Sur 11.5 >>>>> WSJT-X 2.4.0 >>>>> Audio Interface: Tascam US-125M external USB device >>>>> Values in the DT column are consistently about 0.1 - 0.4 >>>>> >>>>> Wasn’t sure if I should post this here or on the WSJT-X list, but I >>>>> thought I’d start here. Any ideas? >>>>> >>>>> >>>>> Jim / K7TXA >>>>> Eagle, ID >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w...@comcast.net > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w5...@comcast.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
