I don't think your rig has that feature Ted.
Buy a Winkeyer or a Mortty. GL 73 Mike VE9AA... p.s.-there's a fantastic N1MMLoggerPlus group on groups.io I need advice for getting N1MM+ to play well with a K2. I have tried it with two different K2 rigs: a K2 with a KIO2, and a different K2-100 with the built in IO. Same problem. The K2 Port parameter is set to ON and N1MM tracks the RX frequency, so I know the rig and the computer are communicating. But a keyboard command from N1MM to the rig returns the error message -- "Unable to send this CW because there is no CW Port set in Config." But the CW box in the N1MM configuration screen IS checked, and "set," and config is: 4800 N 8 1 DTR and RTS Always On (and every other possible combination thereof); Radio on Nr 1, and PTT via radio command mode CW. I have also tried every possible permutation of KIO2 and KUSB cables, on both rigs, in case of a badness there. No change. Same problem every time. I know that when using my K3 with N1MM it's necessary to have the K3's menu settings for DTR and RTS set properly to CW to match the settings in N1MM . . . but I have found no such option in the K2 menus. I have also read that it can be done using a W1EL keyer, but having outboard dongles sort of defeats my purpose. Can it be done with just the K2/KIO2, a KUSB cable, and an ordinary computer? Thanks, anyone. Ted, KN1CBR Mike, Coreen & Corey Keswick Ridge, NB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com