I’m doing exactly the same thing except my win 7 desktop still running win 7. I’ve only got ham applications on it and have no timing issues with cw. I did buy a MORTTY to offload the cw timing, but haven’t set it up yet.
https://hamprojects.info/mortty/ 73, Josh W6XU Sent from my iPad > On Oct 14, 2022, at 2:51 PM, Brian Hunt <huntin...@coastside.net> wrote: > > I might add that the computer is an old Win7 desktop running Win10. > Definitely not a powerhouse. :-) > > 73, > Brian, K0DTJ > >> On Oct 14, 2022, at 14:40, Brian Hunt <huntin...@coastside.net> wrote: >> >> I have been using a USB-to-serial converter cable for connection between >> the K3 and computer running N1MM+. I use DTR keying on the K3 with VOX and >> QSK on. This leaves the K3 internal keyer and paddle free to use at a >> different speed for fills, etc. >> >> I have noticed the CW timing from the computer to falter a bit once in a >> while depending on what else the computer is doing at the time. I try to >> minimize the number of apps running. Typical CW speed is 22-32 wpm so I >> don’t know how it would do faster than that. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com