Lou,
I appreciate the suggestion, but it is with a K4D, properly cabled, used
to work fine, and does it on some bands but not others... changed the
delay to 15ms and still does it... Also seems to depend on band; for
example, does it on 10m, not on 12m...
Also, below, I said 2 SWR meters; I meant 3...
73 de Dave, W5SV
On 19-12-22 21:28, Lou Laderman wrote:
Check the delay setting on your transmitter. You might have a hot switching
issue. I think (but check your manual) that unless you’re using the KPA1500
with a K3 or K4 without the 15-pin Elecraft interface cable, you’ll want at
least 10ms of delay to avoid that. I had that issue with a K4 and a PGXL.
Default on the K4 is 8ms and the PGXL needed 10ms.
73, Lou W0FK
Lou Laderman
Sent from my mobile device
On Dec 19, 2022, at 2:59 PM, David F. Reed <w5sv.d...@gmail.com> wrote:
My KPA1500 has started faulting inappropriately for High SWR.
I say inappropriately because all 2 of my SWR meters (K4D, KPA1500, Palstar
HF-AUTO) show an SWR of between 1.1:1 and 1.2:1. with just the K$ transmitting
and also with the KPA1500 in fine as it faults out.
Any ideas?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
