Hi Dave,
Good morning!
Mine shows .0 A on the display when idle on all bands.
---Paul AK1P
PS: See you in the Fox hunt tonight?
On 11/5/2024 8:57 AM, David Olean wrote:
I have a KPA 500 that is hardly ever used. I think I made less than ten
contacts with it. As a result, I am not that familiar with it except
that it worked great. I loaned it out to a friend and it came back
broken. I am trying to figure out what happened. When I key the radio I
see about 0.6 amps of idle current. TX Signals will pass thru OK on
standby, but if I try transmitting into the amp, I see a high input
VSWR and the idle current stays constant at 0.6 amps. There is no
output power. It seems that maybe the input TR switch may be at fault.
Question: What is the proper idle current for the FETS as displayed on
the screen? If I had a schematic, I could dig into it, but not having
that, I figured that I would ask a few questions to get me pointed in
the right direction. Can anyone help out?
Dave K1WHS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
