Hello, What is the problem? My ssb-transmit has distortion on 10m. The other bands are ok. I have no mods on ksb2.
k2/4781 73 de juha oh6os -------------------------------------------------------------- If it's on one band, it's usually RF getting into the audio circuits on that band, most commonly through the microphone connector. One other thing that could be a factor with the K2 is that on 10 meters the output is usually the lowest, so it's just possible that you're over-driving the rig with audio on that band to make full output. Are you using an external mic preamplifier? That's a common source of both RF feedback into the audio and for enough audio to over-drive the rig. Even if you have no audio preamplifier, the possibility of RF getting into the mic is the first thing to check. The easiest way to do that is to switch from your antenna to a good dummy load and compare your audio on a monitor receiver. Ron AC7AC _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
