Ken, I would suggest a better USB to serial adapter - or if possible, use a desktop computer with a real serial port. If your USB to serial adapter is connected to a USB hub, that might be a problem - several folks have reported miscellaneous mysteries occurring with that combination, but they sometimes disappear when connected to a native USB port.
I have never noticed any problem like that on any version of HRD that I have used, but then I have always used a real COM port. 73, Don W3FPR > -----Original Message----- > > I updated my copy of N1MM Logger (v6.10.10)in the hope > that I would be able to get into the CQWW this weekend > and noticed that it didn't recognize VFO B either. > > On a related note, I downloaded, installed and > configured Ham Radio Deluxe a few evenings ago and > found that it's ability to display the K2's frequency > was very shaky. If the K2 was tuned to 7015.45 kHz > then HRD would display the correct freq for a few > seconds, then it might display something like 701 for > a few seconds, then 545 for a few more secs, then some > other combination of digits from the freq > next...changing every 10 or 15 seconds. > > The K2 is connected to my notebook via the cable > provided with the KIO2 and through a serial-to-USB > converter. > > Any help would be gratefully accepted. > > 73, > > Ken Alexander > VE3HLS _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
