That information source is incorrect. The 2 band boards can be built for any 2 bands.
The 4 band boards OTOH, share components between 2 adjacent bands, so only 40/30 meters and 20/(17 or 15) meters may be used on the 4 band board. Yes, either of the band pairs on the 4 band board could be changed to another band, but then it would only be usable as a 3 band board because the LPF sharing will not allow differnet band combinations (i.e. 80 and 40 meters cannot share a single low pass filter). 73, Don W3FPR > -----Original Message----- > > Could someone help clear something up for me? > > Are there any band choices on the KFL1-2 that are not compatible with > each other? I can't find anything in the documentation that says > otherwise. On my last K1, I had 40 and 80 meters on the same board. > It worked fine and I had no problems. Now someone is telling me that > this combination shouldn't have worked and that only 80 & 15 can be > put on the same board. > > Could someone help clear this up for me? I am contemplating another > K1 but use 40 & 80 meters almost exclusively and want this combination > in the rig. > > Thanks and 72 > > -- > JT Croteau, W6FO/1 - Manchester, NH > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.17.19/663 - Release Date: 2/1/2007 2:28 PM _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com