There is no known problem for using the K2 with any of the soundcard
interfaces as far as I know. Most interface boxes allow for configuring
to the proper microphone cabling (even if they offer special cables).
And the K2 can be configured to use most any microphone wiring scheme.
The K2 audio that is fed to the interface card is quite another
decision. The headphone jack and the external speaker jacks are easy
candidates, but will vary with the setting of the AF Gain control (easy
enough to adjust by looking at the waterfall display background color),
but if you want an independent fixed audio output, my K2 Fixed Audio
board is one solution. See my website > http://w3fpr.qrprqdio.com
(I no longer have kits, but I still have a few boards available).
For the K2/100 the board can be mounted between the front panel and the
control board.
73,
Don W3FPR
Gary McKelvie wrote:
Hi to the List,
I'm thinking of buying the kit for the K2 with the 100 watt PA. I will
mainly be operating on Digital modes such as PSK 31 MFSK 16 RTTY and
Hellschreiber. I will be using a Tigertronics SL 1+ interface but was
wondering if there are any known problems with the K2 and any or all of
these modes before I buy the Kit and start building.
Regards
Gary G7USC
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
