Tom,
The K2/KIO2 Programmers Reference is available for download from the
Elecraft website >
http://www.elecraft.com/manual/KIO2%20Pgmrs%20Ref%20rev%20E.pdf
It contains all the commands and their formats. If you create a piece
of software that can send and receive these commands over an RS-232
port, you will have the software that you desire.
The commands can even be sent manually or from a script using a terminal
program such as HyperTerm.
That is about as open source as you can get. Pick your programming
language from assembler through the most exotic and control your
display/input presentation and the resulting serial port commands.
73,
Don W3FPR
73,
Don W3FPR
Tom Zeltwanger wrote:
Can anybody recommend a source of any open source software or libraries
(preferably "C" language) for talking to my K2? I just build the KIO2 and am
looking at doing some custom interface programming.
I would also be interested in seeing what complete software packages are out
there, but my main interest is in something I can use to start my own program,
or source code I can really customize. This will run on a small embedded
processor with a hex heyboard, so I am not really looking for a fancy GUI.
Also - is there a problem with the list? Or is everyone all talked out? I only
received 2 messages since yesterday aftenoon - very unusual.
73,
Tom KG3V
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
