Many thanks Don, and Mike K5NU
I love this reflector, always so helpful and interesting
73 Rob G3RCE
On 25 Apr 2007, at 15:08, Don Wilhelm wrote:
Robert,
Wire the K2 mic header for the Yaesu configuration (I highly
recommend using wirewrapping if you can locate/borrow a tool and
some #30 wire) and that mic should work FB.
If you want to check on the mic gain, hold DISPLAY to indicate ALC
and check to see how many ALC bars are illuminated. If you see one
or more blinking on peaks, that is enough. You have 2 levels of
gain and 4 levels of compression available in the K2 menu and that
is usually enough - I suggest setting the SSBA at 2 and SSBC at
3:1, but your mileage may vary on the settings. Try it.
73,
Don W3FPR
Robert Allbright wrote:
Hi Elecrafters
I have never used my K2 on SSB but have the option fitted.
I have a Yaesu MH-31B8 dynamic microphone that I would like to use.
Has anyone tried this mic? and did you need a pre-amp?
Thankyou and 73
Robert G3RCE
K2/100 #5219
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com