Thanks for all the help. Used a combination. Came up
with the "Big Red" method. Sure someone has already
done it. Only requirement is a large clamp or vise.
Follow directions in the manual with first foot and
insert bail in that foot. Take other foot and put the
regular screws in. Chew some bubble gum (Big Red) and
put a little over the screw to hold them all the way
in. Insert in vise or clamp and tighten until screws
line up and insert foot and tighten. I used a bench
mounted wood faced carpenters vise. The whole process
took about 5 minutes (including time to get all the
gum out).
I see there is a slight bow in the plate but will
flatten when screwed on. Thanks again!
Jim
____________________________________________________________________________________Pinpoint
customers who are looking for what you sell.
http://searchmarketing.yahoo.com/
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
