I think this is covered in the FAQ under 'Memory'.  It talks about M1-M4
being band-stacking registers on a per-band basis.

73,
Ed - W0YK 

> -----Original Message-----
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick
> Sent: Thursday, 26 July, 2007 22:09
> To: Don Rasmussen
> Cc: Elecraft List
> Subject: Re: [Elecraft] K3 Band Stacking registers?
> 
> 
> On Jul 26, 2007, at 9:57 PM, Don Rasmussen wrote:
> 
> > The "band stacking" registers topic is one that I think could be 
> > clarified in the FAQ.
> 
> Don,
> 
> One other point we may not have covered in the FAQ. Of the 
> 100 general-purpose memories (which doesn't include the 
> M1..M4 per-band memories), memories 1-9 can be accessed with 
> a shortcut method: Just tap M->V, then 1-9 on the keypad. I'd 
> recommend using these to get to your 9 favorite bands (or 
> frequencies) if you don't want to use the BAND UP/DN switches 
> or enter the MHz value using FREQ ENT.
> 
> Of course once you're on the desired band, you can then use M->V with
> M1..M4 to get to four additional favorite frequencies/modes 
> on each band. Every memory stores both VFOs, filter presets, etc.
> 
> The reason we didn't provide individual band-stacking 
> switches is that the K3, unlike other rigs in this class, is 
> not big enough to have its own zip code. We used the 
> available space for buttons assigned to often used functions 
> like preamp, attenuator, AGC, NR, NB, notch, etc. We think 
> it's a good tradeoff.
> 
> 73,
> Wayne
> N6KR
> 
> 
> ---
> 
> http://www.elecraft.com
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 

_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to