Gil,
The FT-900 knob is no longer available. You can add an FT-900 (or ft100
or FT847) tire to your stock K2 knob and add the Elecraft finger dimple
too. The stock K2 knob has adequate weight if the drag is adjusted
properly, but the sharp edge is a problem for me - the rubber tire helps
dramatically - I don't care for the finger dimple, but many folks seem
to like them.
73,
Don W3FPR
Gil Gibbs wrote:
To those who dare - I'm in the middle of a mess, attempting to rework
my whole QTH shack "upstairs in the big house", and in so doing, I
enjoy firing up the Icom 756 PRO I have alongside the K2 which is now
doing a better job of SWL than the Icom. The only real problem I run
into is that the Icom tuning knob has some "weight" to it, along with
a spinner dimple, which makes it easier to tune, and "faster" than the
K2. I'm wondering if it makes any sense to attempt to find an FT-900
knob, or just figure out a way to add some weight to the k2 knob? And,
yes, I've already looked over the Yaesu website, no joy at this point.
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com